Welcome to Henan Wilkester Wear-resistant Material Co., Ltd!

Home

Common Problems in the Use of Wear-resistant Liner

2020-01-17

1. The wear-resistant lining board shall be applied once, and the material shall be poured again after the raw materials of the hopper are stored to the 2/3 of the total warehouse capacity.

2, wear-resistant liner operation, to continue to maintain the raw materials into the warehouse blanking point of the warehouse raw materials pile, and continue to maintain the storage of raw materials in the warehouse capacity of about 1/2 of the total warehouse capacity.

3, prohibit the raw materials immediately impact wear-resistant liner.

4. The intensity particles of various raw materials are different. The raw materials and total flow rate cannot be disassembled and replaced casually. If it is to be changed, it cannot exceed 12 of the working capacity of the original design scheme. Changing the raw materials or total flow rate casually will endanger the service life of the wear-resistant liner.

5, wear-resistant lining application working temperature, generally not suitable for more than 100 ℃.

6. External force shall not be applied to destroy the wear-resistant lining structure and loosen the standard parts casually.

7. The time when raw materials are stationary in the warehouse is not suitable for more than 36 hours (for viscous raw materials, please do not have to stay in the warehouse to prevent clumping). Raw materials with moisture content lower than 4 can moderately increase the stationary time.

8. When the temperature is low, the wear-resistant lining board warmly reminds the raw materials to stay still in the warehouse to prevent frozen blocks.

Key words:

High molecular weight polyethylene sheet: high density polyethylene sheet will always be worn?

What should I pay attention to when buying wear-resistant linings?